| Part: 20PL-8D6-ZAD-17C |
1 of 21 |
News Flash |
| Products: |
PLCC-Autoeject-adapters |
| Package-type: |
PLCC |
| Package-pin-count: |
20-pins |
| DIP-plug: |
600-mils |
| DIP-pin-count: |
8-pins |
| Price: |
$70.00 |
| Availability: |
stock |
| Indexed: |
01-01-2000 |
|
|
| Description: 20-PLCC programming adapter for serial EEPROMs in 20-lead PLCC packages. Dead-bug loading autoeject socke, i.e. the package is inserted up-side-down with the cut corner to the right, accepts plastic packages only. This PLCC programming adapter is wired to accomodate Xilinx, Atmel and all pin compatible serial EEPROMs from 1736 to 17C010 and 17C010A. The adapter works on any programmer which supports those serial EEPROMs in an 8-pin DIP package. |
| Development-Tools: EMP10, EMP11, EMP20, EMP30 |
| Manfs.: Needham's Electronics |
| Serial-Memory: 1701, 1704L, 17128E, 17128EL, 17256E, 17256EL, 1736E, 17512L, 1765E, 1765EL, 17C010, 17C010A, 17C020, 17C020A, 17C128, 17C128A, 17C256, 17C256A, 17C512, 17C512A, 17C65, 17C65A, 17LV010, 17LV010A, 17LV020, 17LV020A, 17LV128, 17LV256, 17LV512A, 17LV65 |
| Manfs.: Atmel, Xilinx |
|
| [Photos|Selection-guides] |
| Part: 20PL-D6-ZAD |
2 of 21 |
News Flash |
| Products: |
PLCC-Autoeject-adapters |
| Package-type: |
PLCC |
| Package-pin-count: |
20-pins |
| DIP-plug: |
600-mils |
| DIP-pin-count: |
20-pins |
| Price: |
$70.00 |
| Availability: |
stock |
| Indexed: |
01-01-2000 |
|
|
| Description: 20-pin PLCC programming adapter with Yamaichi ?dead-bug? loading, i.e. the package is inserted up-side-down, autoeject ZIF PLCC test socket for devices in 20-lead PLCC packages. It is not recommended for devices in LCC or ceramic J-lead packages. This programming adapter is wired one-to-one (generic) and is used mostly for programming of PALs, such as 16V8 and other devices with one-to-one pin assignment between PLCC and DIP package. |
| Programmable-Logic: 16V6 |
| Manfs.: |
|
| [Photos|Selection-guides] |
| Part: 28PL-24D6-3-ZAL |
3 of 21 |
News Flash |
| Products: |
PLCC-Autoeject-adapters |
| Package-type: |
PLCC |
| Package-pin-count: |
28-pins |
| DIP-plug: |
600-mils |
| DIP-pin-count: |
24-pins |
| Price: |
$85.00 |
| Availability: |
stock |
| Indexed: |
01-01-2000 |
|
|
| Description: 28-PLCC programming adapter for 22V10, PLCC no-connects: 1-8-15-22, and all pin compatible devices in 28-lead PLCC packages. The adapter converts 28-pin PLCC package to 24-pin DIP plug. This PLCC progamming adapter works on any programmer which supports 22V10 or the required pin compatible device in a 24-pin DIP package. Yamaichi Autoeject test and burn-in socket is used on this adapter. |
| [Photos|Selection-guides] |
| Part: 28PL-24D6-5-ZAL |
4 of 21 |
News Flash |
| Products: |
PLCC-Autoeject-adapters |
| Package-type: |
PLCC |
| Package-pin-count: |
28-pins |
| DIP-plug: |
600-mils |
| DIP-pin-count: |
24-pins |
| Price: |
$85.00 |
| Availability: |
stock |
| Indexed: |
01-01-2000 |
|
|
| Description: 28-PLCC programming adapter for PALs and all pin compatible devices in a 28-lead PLCC package with PLCC no-connects: 1-10-15-21. The adapter converts 28-pin PLCC package to 24-pin DIP plug. This PLCC progamming adapter works on any programmer which supports those devices in a 24-pin DIP package. Yamaichi Autoeject test and burn-in socket used in this programming adapter, rated at 10,000 insertions, is suitable for plastic packages only, i.e. for OTP or flash parts only. |
| [Photos|Selection-guides] |
| Part: 28PL-24D6-ZAL-751 |
5 of 21 |
News Flash |
| Products: |
PLCC-Autoeject-adapters |
| Package-type: |
PLCC |
| Package-pin-count: |
28-pins |
| DIP-plug: |
600-mils |
| DIP-pin-count: |
24-pins |
| Price: |
$85.00 |
| Availability: |
stock |
| Indexed: |
01-01-2000 |
|
|
| Description: 28-PLCC programming adapter for Philips 87C750 and 87C751 and all pin compatible devices in a 28-lead PLCC package. The adapter converts 28-pin PLCC package to 24-pin DIP plug. This PLCC progamming adapter works on any programmer which supports Philips 87C750 and 87C751 or the required pin compatible device in a 24-pin DIP package. Yamaichi Autoeject test and burn-in socket used in this programming adapter, rated at 10,000 insertions, is suitable for plastic packages only, i.e. for OTP or flash parts only. |
|
| [Photos|Selection-guides] |
| Part: 28PL-D6-ZAL |
6 of 21 |
News Flash |
| Products: |
PLCC-Autoeject-adapters |
| Package-type: |
PLCC |
| Package-pin-count: |
28-pins |
| DIP-plug: |
600-mils |
| DIP-pin-count: |
28-pins |
| Price: |
$85.00 |
| Availability: |
stock |
| Indexed: |
01-01-2000 |
|
|
| Description: 28-PLCC programming adapter for devices in 28-lead PLCC package. The adapter is wired one-to-one, it is generic. This PLCC progamming adapter is used mainly for PALs, Philips 87C752 microcontroller, some memories, etc. Yamaichi Autoeject test and burn-in socket used in this programming adapter, rated at 10,000 insertions, is suitable for plastic packages only, i.e. for OTP or flash parts only. |
| [Photos|Selection-guides] |
| Part: 32PL-28D6-ZAL |
7 of 21 |
News Flash |
| Products: |
PLCC-Autoeject-adapters |
| Package-type: |
PLCC |
| Package-pin-count: |
32-pins |
| DIP-plug: |
600-mils |
| DIP-pin-count: |
28-pins |
| Price: |
$95.00 |
| Availability: |
stock |
| Indexed: |
01-01-2000 |
|
|
| Description: 32-PLCC programming adapter wired for 27C256 and 27C512 memories. Yamaichi Autoeject test and burn-in socket used in this programming adapter, rated at 10,000 insertions, is suitable for plastic packages only, i.e. for OTP or flash parts only. |
| [Photos|Selection-guides] |
| Part: 32PL-8D3-ZAL-45DB011 |
8 of 21 |
News Flash |
| Products: |
PLCC-Autoeject-adapters |
| Package-type: |
PLCC |
| Package-pin-count: |
32-pins |
| DIP-plug: |
300-mils |
| DIP-pin-count: |
8-pins |
| Price: |
$95.00 |
| Availability: |
stock |
| Indexed: |
01-01-2000 |
|
|
| Description: 32-pin PLCC programming adapter for Atmel serial DataFlash EEPROMs in 32-lead PLCC packages. This PLCC programming adapter is˙wired to 8-pin DIP. The adapter works on any programmer which supports Atmel 45D and 45DB DataFlash EEPROMs. This PLCC programming adapter has open top ?Autoeject? ZIF test socket made by Yamaichi. |
|
| [Photos|Selection-guides] |
| Part: 32PL-D6-ZAL |
9 of 21 |
News Flash |
| Products: |
PLCC-Autoeject-adapters |
| Package-type: |
PLCC |
| Package-pin-count: |
32-pins |
| DIP-plug: |
600-mils |
| DIP-pin-count: |
32-pins |
| Price: |
$95.00 |
| Availability: |
stock |
| Indexed: |
01-01-2000 |
|
|
| Description: 32-PLCC programming adapter for devices in 32-lead PLCC package. The adapter is wired one-to-one, it is generic. This PLCC programming adapter is used mainly for 1 to 4Mb EPROM and flash memories, etc. The Yamaichi Autoeject test and burn-in socket used in this programming adapter, rated at 10,000 insertions, is suitable for plastic packages only, i.e. for OTP or flash parts only. |
| Development-Tools: EMP10, EMP11, EMP20, EMP30 |
| Manfs.: Needham's Electronics |
| Parallel-Memory: 27BV010, 27BV020, 27BV040, 27C010, 27C020, 27C040, 27C080, 27LV010A, 27LV020A, 27SF010, 27SF020, 28C010, 28F010A, 28F020, 28F020A, 28LV010, 28SF040A, 28VF040A, 29BV010A, 29BV020, 29C010A, 29EE010, 29EE020, 29F010B, 29F040B, 29F080A, 29LE010, 29LE020, 29LV010A, 29LV020A, 29LV040A, 29SF010, 29SF020, 29SF040, 29VE010, 29VE020, 29VF010, 29VF020, 29VF040, 29W010B, 29W040B, 37VF010, 37VF020, 37VF040, 39LF010, 39LF016, 39LF020, 39LF040, 39LF080, 39SF010, 39SF010A, 39SF020A, 39SF040, 39VF010, 39VF016, 39VF020, 39VF040, 39VF080, 49BV010, 49BV020, 49BV040, 49BV080, 49HBV010, 49HF010, 49HF020, 49HLV010, 49LF020, 49LF040A, 49LF080A, 49LV010, 49LV020, 49LV040 |
| Manfs.: AMD, Atmel, ST, Silicon Storage Technology |
|
| [Photos|Selection-guides] |
| Part: 44PL-40D-2-ZAL |
10 of 21 |
News Flash |
| Products: |
PLCC-Autoeject-adapters |
| Package-type: |
PLCC |
| Package-pin-count: |
44-pins |
| DIP-plug: |
600-mils |
| DIP-pin-count: |
40-pins |
| Price: |
$110.00 |
| Availability: |
stock |
| Indexed: |
01-01-2000 |
|
|
| Description: 44-PLCC programming adapter for 16-bit wide memories, such as, 27C1024, 2048, 4096 and pin compatible devices. No connects are: 1-13-23-33. This programming adapter has Yamaichi autoeject test and burn-in socket designed for plastic packages, OTP or flash. It is not recommended for windowed, ceramic J-Lead, and for leadless packages. |
|
| [Photos|Selection-guides] |
|
programming-adapter.com 
